Product Description
Anti-Slip Wear-Resistant Floor is a solid-powder floor repair and treatment material formulated from inorganic silicate binders, carefully selected aggregates, and multiple additives. It is developed to repair worn, slippery, or "sand-blasting" cement floors in demanding high-traffic environments. Mixed with water at roughly 1 part water to 4 parts powder, it is trowelled onto a prepared substrate at 3–5 mm thickness and textured before set with a stiff broom, brush, or textured roller to leave a rough, high-friction profile. The repair layer bonds strongly to the substrate thanks to its excellent water retention, and improves durability, impact resistance, water resistance, freeze-thaw resistance, and aging resistance while adding flexibility and waterproofing that keeps the cement surface dry.
Because we control the inorganic silicate binder and aggregate grading on our automated dry-mix lines, the repair mortar holds its water retention reliably - a property that directly determines whether a 3–5 mm repair layer cures without drying out and delaminating. For contractors and property managers managing parking ramps and wet workshops, that means a textured repair that performs through freeze-thaw cycles and temperature swings rather than spalling after the first winter.
Specifications
|
Parameter |
Specification |
|
Product model |
Anti-Slip Wear-Resistant Floor |
|
Material type |
Inorganic silicate, selected aggregates, cement and quartz sand |
|
Water-to-powder ratio |
~1 : 4 (1 kg water : 4 kg dry powder) |
|
Typical application thickness |
3 – 5 mm |
|
Coverage rate |
~1.5 kg/m² per 1 mm thickness |
|
Drying time |
~24 hours |
|
Key properties |
Water retention, strong substrate adhesion, freeze-thaw and thermal-shock resistance |
Applications
- Parking lot ramps and loading docks - the broom/roller texture restores traction on inclined concrete where wet tires are most likely to slip.
- Wet industrial workshops such as food processing plants - the waterproof, water-resistant layer keeps cement floors dry and prevents moisture-related degradation.
- Walkways and high-traffic corridors needing a new high-gauge base - repairs sand-blasting cement floors and rebuilds a durable, skid-resistant working surface.
Customization
Texture finish (broom striations, brushed, or pitted roller pattern), application thickness, and aggregate grading can be tuned to the slip-resistance requirement of the specific ramp or walkway.
Packaging & Transportation
Dry powder in bags on strapped, shrink-wrapped pallets for container loading. EXW from our Deqing, Zhejiang manufacturing base. Exact bag size is To Be Confirmed for this product.
FAQ
Q: How is the non-slip texture created?
A: The mortar is trowelled on at 3–5 mm, and before it sets a stiff broom, brush, or textured roller is worked over the surface to produce striations or a pitted, high-friction profile.
Q: What water ratio should be used on site?
A: Mix at approximately 1 part water to 4 parts dry powder (1 kg water : 4 kg powder) with an electric mixer until uniform; adjust slightly for substrate flatness and desired thickness.
Q: Can it repair floors that are already sanding or dusting?
A: Yes. It is specifically intended for repairing "sand-blasting" cement floors and high-traffic, heavy-load surfaces where a new, wear-resistant, skid-resistant base layer must be rebuilt.
Hot Tags: skid resistant floor, China skid resistant floor suppliers, factory, Anti slip Wear resistant Floor, Cement Floor Treatment Agent, concrete densifier, dry pack mortar, Non Metallic Wear Resistant Flooring, Self leveling Floor
